YANGZHOU JEREL NEW MATERIAL CO., LTD
Add to Cart
PRODUCT SPECIFICATION & PACKING
Product Name Blister aluminum foil/Pharmacitical aluminum foil/PTP aluminum foil
Alloy 8011 H state
Width≤600mm
Thickness 20mic, 25mic, 30mic
Construction(Unprinted) OP/ALU/VC; (Printed) OP/INK/ALU/INK/VC
ID 76mm/152mm(3 inches/6 inches)
ED 240mm
Length 1500m(20mic)
Weight 60g/㎡(20mic); 20kg/roll(250*0.02mm)
Density 2.7g/㎤
PackingPE film/Foam gasket/plastic plug/carton/pallet
Container load 20-25 tons in 20 GP container
PRODUCT PERFORMANCE AND CHARACTERISTICS
1Primer (OP) is suitable for uvink, solvent ink, water based ink
2Heat sealing lacquer (vc) is suitable for ALU ALU FOIL/PVC /PP/PS/PET
3HSL 3-5g is suitable for Asian standards, 6-8g is suitable for European standards
4Printing colors: 1-3 colors, double-sided printing, full bottom with single color printing
5Water vapor transmission rate, national standard 0.5g/㎡24h
6Heat sealing strength 7.0N(PVC),6N(PVDC)
Blister Aluminum Foil is a kind of coated aluminum foil, used for cover lidding foil in pharma industry. It provides excellent properties such as of anti-oxygen, moisture-proof, leak-proof, carry-home, anti-pollution, etc.
Adopting hard anodized aluminum as cover material, blister foil is easy to break aluminum foil to take out the drugs by pushing the cover. Adopting heat-seal coating material, which cannot be stripped, PTP blister foil can be bonded with all kinds of plastic-based materials.
PRODUCT USAGE
Commenly heatsealed with PVC, PVDC, PP PET PE etc.